2.2 SF6200MS Features
Built-in 500W amplifier, integrated 8 power A + B independent dual speaker loop partition
output, each partition has a LED indicator, independent volume adjustment (6 files),
forcibly cut to output power 100V when receive alarm signal.
Partition output with three-wire, four-wire Strong cut regulation function.
With 4 audio input, 2 microphone input with 24V phantom power.
Function of fault self-checking of the electrical system,and complete inspection of manual
system.
Measuring function of the status of each partition speaker loop(open circuit, short circuit,
overcurrent, impedance change).
The real-time indication function of the system status.
8- ways short circuit/level trigger manner, 3-way different audio sources to configure the
trigger response, output can be configured with arbitrary partition
、
group and Short circuit
contact combination.
External connecting a backup power amplifier, when the built-in amplifier doesn’t work, it
will switch to the backup amplifier automatically.
External 24V stand-by power supply, realizing continuous work without delay when power
off.
Built-in 24V automatic charging function
With one way IP address reset port.
6-bit address DIP switch, can set the extended address.
To Next Page
Loading...