50
GBU-ECO-MF-V01
11 LIST OF POSSIBLE ERRORS
ERROR NUMBER CAUSE
9 TIMEOUT – Zero and reference capture time
exceeded.
10 NAK reception in communications ‘TYPE 0’,
‘TYPE B’ and key.
14 UNSTABLE WEIGHT.
35 INCORRECT CHECKSUM– Series E2prom read
error.
51 NOVRAM WRITE.
60 INVALID DATA.
61 DATA TOO LARGE – If the set weight is less than
20000 net points. If a Plu greater than 100 is
requested. If an item is programmed with a value
greater than that allowed.
62 DATA TOO SMALL – If the set weight is greater
than 85000 net points. If Plu 0 is requested. If there is
any scale parameter with an incorrect value.
63 NULL DATA – If the set weight entered is 0.
64 WEIGHT OUT OF RANGE – Tare out of range.
65 INCORRECT WEIGHT – If the set weight entered is
not a multiple of the step.
To Next Page
Loading...
