Important Safety Instructions
SAVE THESE INSTRUCTIONS:
This manual contains important safety, installation, and operating instructions for the
Remote Meter.
General safety information
Please inspect the MT50 thoroughly after it is delivered. If any damage is seen,
please notify the shipping company or our company immediately. A
photo of the
damage may be helpful.
Read all instructions and cautions in the manual before starting the installation.
Keep the MT50 away from rain, exposure, severe dust, vibrations, corrosive gas, and
intense electromagnetic interference.
Do not allow water to enter the remote meter.
There are no user-serviceable parts inside the controller. Do not disassemble or
attempt to repair it.
To Next Page
Loading...
