Need help?Do you have a question about the Epever Tracer 2210CN and is the answer not in the manual?
General| Model | Tracer2210CN |
|---|---|
| Nominal system voltage | 12V / 24V Auto |
| Rated charge current | 20A |
| Altitude | ≤3000m |
| Cooling | Natural Cooling |
| Max. PV open circuit voltage | 100V |
| Max. PV input power | 260W (12V), 520W (24V) |
| Temperature compensation | -3mV/°C/2V (default) |
| Communication Interface | RS485 |
| Operating Temperature | +55°C |
| Protection | PV short circuit, PV reverse polarity, Battery reverse polarity, Over temperature |
Crucial safety guidelines and precautions for handling and installing the controller.
Explains the MPPT technology for efficient solar energy harvesting.
Describes the three-stage battery charging process: Bulk, Constant, and Float.
Details the various built-in protection mechanisms against electrical faults and environmental factors.
Provides a guide to common faults, their possible reasons, and troubleshooting steps.
To Next Page