Need help?Do you have a question about the Epever UPower Series and is the answer not in the manual?
General| Waveform | Pure sine wave |
|---|---|
| DC Input Voltage | 12V/24V/48V |
| AC Output Voltage | 220/230VAC |
| AC Output Frequency | 50Hz/60Hz |
| THD | <3% |
| Operating Temperature | -20°C to 50°C |
| Cooling | Fan |
| Communication | RS485 |
| Protection | Overload protection, Over temperature protection, Short circuit protection, Over voltage protection |
Provides a general description of the UPower series inverter/charger and its features.
Details the product's physical appearance and key components.
Explains the naming convention and structure of different product models.
Illustrates the system's wiring diagram for connections.
Provides crucial safety and preparatory guidelines before installation.
Specifies recommended wire sizes and circuit breakers for PV, Utility, and Battery connections.
Details the proper procedures and clearances for mounting the unit.
Outlines the sequential steps for installing the inverter/charger, including wiring.
Explains the function and status of various LED indicators on the unit.
Describes the operation and function of each button on the control panel.
Details the information presented on the LCD screen in real-time operation.
Guides users through configuring various parameters via the setting interface.
Covers additional functionalities like output voltage/frequency switch and relay/remote interfaces.
Lists fault codes, their descriptions, and associated indicators for diagnostics.
Provides solutions for common faults and operational issues.
To Next Page