Important Safety Instructions
Please reserve this manual for future review.
Please reserve this manual for future review. This manual contains all instructions about safety,
installation and operation for the inverter/charger.
Read carefully all the instructions and warnings in the manual before installation.
Non-safety voltage exists inside the inverter/charger, users must not dismantle it by itself in
order to avoid personal injury, contact professional maintenance personnel of our company
in need of maintenance.
Keep the inverter/charger out the reach of children.
Do not place the inverter/charger in a damp, oily, inflammable and explosive or a severe
environment with a large amount of dust accumulation.
The utility input and AC output with high voltage, don’t touch wire connections.
Install the inverter/charger in well ventilated places, it’s shell may produce heat during
operation.
It is suggested to install appropriate external fuses/breakers.
Make sure switching off all connections with PV array and the fuse/breakers close to battery
before inverter/charger installation and adjustment.
Make sure all connections remain tight to avoid excessive heat from a loose connection.
It’s an off-grid inverter/charger, not for on-grid system.
This inverter/charger can only be used singly, parallel or in series connections will damage
the devices.
To Next Page
Loading...
Need help?
General