What to do if the Epever TRIRON N Controller is not working even when the wire connection is correct?
If your Epever Controller isn't working despite correct wire connections, the battery voltage may be too low. Ensure the battery voltage is at least 9V to activate the controller.
Why is the charging LED indicator off on my Epever TRIRON N during the day with proper sunshine on the PV modules?
The charging LED indicator might be off because of a PV array disconnection. Confirm that the PV and battery wire connections are correct and tight.
General| Brand | Epever |
|---|---|
| Model | TRIRON N Series |
| Category | Controller |
| Language | English |
General safety guidelines and warnings for installation and operation.
Introduces the TRIRON N series as modular MPPT solar charge controllers and their capabilities.
Details the physical characteristics and identified ports of the TRIRON N series controller.
Lists and describes the different power modules and display/interface modules available.
Explains the naming convention used for TRIRON N series controller models.
Describes optional accessories that can enhance the functionality of the TRIRON N series controllers.
Key considerations and precautions for a safe and correct installation process.
Specifies the requirements and considerations for connecting the PV array to the controller.
Guidelines for selecting appropriate wire sizes for PV, battery, and load connections.
Instructions for securely mounting the controller, including clearance requirements.
Explains the features and indicators of the DB1, DS1, and DS2 display modules.
Describes the various interface modules (UCS, RCM, RCS, USB1) and their functionalities.
Details supported battery types and voltage control parameters for optimal charging.
Explains the different load working modes and how to configure them via LCD or RS485.
Lists and explains the various protection functions against electrical faults and environmental conditions.
Provides a guide to identifying common faults, their causes, and troubleshooting steps.
Outlines essential maintenance tasks to ensure the longevity and optimal performance of the controller.
To Next Page