Ephoca HPAC 2.0 User Manual

32
TEMPERATURE LIMITING (HOTEL MODE)
This mode restricts the temperature setting to 71.5°F to 82.5°F in cooling mode and 61°F to
75°F in heating mode. It also disables dehumidification mode and automatic mode.
TO ENABLE RESTRICTED MODE
When the system is off, press and hold the Power button for 10 seconds until
uul
appears.
Press the
+ button until Hot appears.
Press the Power button once.
Press the
+ button to select En (for enable).
Press the Power button once to activate the setting.
Press the and hold the Power button once to save the setting, the display will turn
off after it has been saved.
TO DISABLE RESTRICTED MODE
When the system is off, press and hold the Power button for 10 seconds until
uul
appears.
Press the
+ button until Hot appears.
Press the Power button once.
Press the
+ button to select ds (for disable).
Press the Power button once to activate the setting.
Press the and hold the Power button once to save the setting, the display will turn
off after it has been saved.

Ephoca HPAC 2.0 Specifications

General

Brand	Ephoca
Model	HPAC 2.0
Category	Heat Pump
Language	English