MOUNTING OPTIONS
The EPIC’s ultra light weight and compact size makes it ideal for all kinds of action. We have provided
you with some basic mounts to help get you started.
All the EPIC mounting accessories utilize a quick clip device that allows the camera to be easily
changed between mounting accessories.
Depending on the kit you purchased, your EPIC may or may not include the following mounts.
Strap Mount – perfect for mounting to helmets with vents, wear on your wrist or just about anywhere
you can think of, strap on the EPIC and catch all the action.
Waterproof Housing – while EPIC is splash resistant, the Waterproof case is a must for any extreme
wet applications. This housing makes the EPIC completely waterproof down to 20 feet! Note: You
must remove the protective film on both side of the lens cover inside the waterproof housing
prior to using under water.
Clip Mount – easily clip to the brim of a hat or the visor of your vehicle.
Bar Mount – whether it’s the cross bars of your ATV, or the handle bars of your mountain bike, this
tube mount will accommodate bars between ½” to 2” in diameter.
Tree Screw – while high in a tree stand or low in a blind, simply screw into any tree branch or trunk at
the desired height to capture your line of view.
Shock resistant saddle – want a little extra padding or just don’t want to use any of the provided
mounting accessories? This dense foam pad used with a simple strap will help you mount the EPIC
and absorb vibrations.
Elbow Joint – With three adjustable wheel hinges, you can capture almost any point of view angle
without any obstruction.
Suction cup – Heavy duty RAM Suction Cup design offers a secure lock mount for contoured or flat
surfaces such as moto helmets and fuel tanks.
To Next Page
Loading...
