Epilog Laser Fusion Pro 32 User Manual

Importing Material Settings
1. To import previously saved settings to a new job, click on the process you want to apply the
settings to. Then click the “Import Material Settings” button.
2. A box will appear asking you to select the settings you want to load into this process. Select your
settings and click “Import”.
3. The material settings should load on to that process and be ready to print to the laser.
- 46 -
SECTION 4: THE JOB MANAGER

Epilog Laser Fusion Pro 32 Specifications

General

Brand	Epilog Laser
Model	Fusion Pro 32
Category	Engraver
Language	English