Need help?Do you have a question about the Episode EA-AMP-SUB-1D-150 and is the answer not in the manual?
General| Power Output | 150W |
|---|---|
| Channels | 1 |
| Input Impedance | 20k Ohms |
| Amplifier Class | D |
| RMS Power | 150W |
| Signal to Noise Ratio | 90 dB |
| Damping Factor | 100 |
| THD | <0.1% |
| Output Impedance | 4Ω |
Explains the meaning of lightning flash and exclamation point symbols indicating electrical risk and important instructions.
Lists 21 essential instructions for safe use, placement, cleaning, and servicing of the apparatus.
Details the POWER, EQ SETTINGS, EQ MODE, POWER MODES, CROSSOVER, PHASE, and VOLUME controls on the front panel.
Describes RCA inputs/outputs, 12V TRIGGER IN/OUT, SPEAKER OUTPUTS, VOLTAGE SELECTOR, and AC POWER IN ports.
Guidelines for optimal amplifier placement, ventilation, and clearance for performance and longevity.
Information on removing rack mount ears and bottom feet for installation flexibility.
Instructions for connecting audio sources and additional amplifiers using RCA cables.
Guidance on connecting speaker wires, emphasizing correct polarity and impedance for subwoofers.
How to connect the 12V trigger output for automatic amplifier power control.
Explanation of TRIGGER, AUTO, ON power modes and how to use EQ presets and EQ MODE settings.
Steps for adjusting VOLUME, CROSSOVER, and PHASE for optimal bass performance and blending.
Key technical data including continuous power output, input sensitivity, frequency response, and dimensions.
Solutions for common issues such as no audio output, hum, buzzing, or amplifier not turning on.
Information on the 2-Year Limited Warranty and how to contact technical support.
To Next Page