Need help?Do you have a question about the Episode EA-AMP-8D-70A and is the answer not in the manual?
Highlights the amplifier's use of latest digital technology for cool-running performance and efficient operation.
Explains individual channel protection indicated by bi-color LEDs for troubleshooting and fault isolation.
Details assigning dedicated or global inputs to channel pairs, with color-coded jacks and a 3-position switch.
Describes level adjustments for each channel pair to match output to areas and prevent clipping.
Covers removable speaker wire connectors and RCA connectors for easy installation and connectivity.
Explains combining adjacent channels for increased power, noting an 8-ohm minimum load requirement.
Notes included rack ears and removable feet for rack mounting, with a warning against stacking components.
Details toggling power via front button, 12V trigger, or audio sensing, set by a rear switch.
Amplifies stereo sources across channels and allows global inputs to be sent to other amplifiers.
Allows independent gain per channel pair and easily couples two channels for increased power.
Provides individual channel inputs for use with multi-channel preamps or dedicated audio sources.
Choose between global or individual inputs and connect speakers using screw terminals.
Disables power to the amplifier and sets power mode via 12V trigger, audio sensing, or front button.
Details 12V trigger input/output, fuse type and location, and the AC power connector.
Provides guidelines for optimal placement, emphasizing ventilation and free air space around the unit.
Instructions for connecting line-level inputs via RCA and speaker-level outputs using stranded wire.
Guides on choosing sources and connecting the power cord, advising against switched outlets.
Step-by-step instructions for bridging two channels to power a single speaker with an 8-ohm minimum.
Explains front panel power operation and the meaning of zone LED status indicators (Blue, Red, Off).
Describes using rear panel adjustments for setting channel volume levels and preventing distortion.
Illustrates connecting multiple audio sources to the amplifier for multi-room audio distribution.
Shows how to connect various sources via an audio matrix switcher for multi-zone audio setups.
Diagram for integrating the amplifier into a home theater system with multiple speaker zones.
Addresses issues like incorrect connections, defective cables, improper switch settings, or low level adjustments.
Guides on resolving hum by checking RCA cables and ensures the amplifier turns on with correct power connections.
Instructs to set the Power Mode Switch to ON for front panel button functionality.
Lists key performance metrics including power output, sensitivity, impedance, frequency response, and dimensions.
Outlines the 2-Year Limited Warranty covering parts and labor for defects under normal use.
To Next Page
General