Maintenance
Main unit care and maintenance
1. Shut off power supply before doing
maintenance.
2. Use only a soft, damp cloth to clean.
Avoid using harsh chemicals.
3. Once cleaning is completed and all
surfaces are dry, re-connect the power
plug.
Spray nozzle maintenance and care
1. When no one is seated, short press
“REAR/MOVE” Button on the main unit,
the nozzle will automatically stretch out
to allow access for cleaning.
2. When the nozzle moves forward, the
nozzle can be removed and cleaned
separately.
3. Use only a soft cloth or soft brush to
clean. Do not pull or push the wand, to
avoid damage.
4. Put the nozzle back on and short press
"Stop" Button to return the spray wand
to its normal position.
14
To Next Page
Loading...
