1. Operate via button on the main unit.
Failure of remote control
Note:
After battery replacement, the remote
control settings will be restored to the
defaults. Please reset.
Remove the remote control from holder.
Open the battery cover and replace the
batteries.
Put the remote control back.
2. Battery replacement
Product unused for a period of time
When the product is left unused for a
long time, especially in cold weather,
it is highly recommended to drain the
water to prevent freezing.
To discharge water
1. Activate flushing, and then turn off angle
valve to stop water supply.
3. Drain the water in the pipeline, unscrew
the hose from the angle valve, attach the
hose horizontally to the ground, wait for
the water in the pipeline and the booster
pump to drain naturally and then reinstall
it.
2. Unplug and cut off the electricity
4. For your safety, it is recommended to put
antifreeze into the remaining water in the
bowl.
Note: Before water discharging, the
power must be cut off!
* Please turn on power and water supply
when using again.
Battery replacement
46.4mm
48.5mm
17.5mm
26.5mm
Female
buckle (-)
Male
buckle (+)
Unplug DC connector and remove the
battery box.
Install new batteries.
Reconnect battery box and put it back.
Note:
1. It is recommended to hire professional
personnel for this operation.
2. It is recommended to use 9V high-quality
dry battery, such as models 6LR61 or 6F22.
3. It is recommended to replace the battery
every two years, otherwise there may be a
risk of leakage.
battery
16
To Next Page
Loading...
