Emergency troubleshooting
Filter maintenance
If poor spray performance occurs under
normal conditions:
2. Unscrew angle valve nut
1. Turn off power and the angle valve
3. Remove filter net
4. Clean out the filter net under running
water using a toothbrush
5. Reinstall filter and angle valve nut.
6. Turn on the angle valve and connect
power.
No water supply
Put around 2.1Gal (8L) water into a barrel
and flush the ceramic bowl.
Note: Avoid water spilling from bowl.
No power
Long press "Flush" Button on the main
unit to flush.
Long press
“Flush” button
15
To Next Page
Loading...
