13
Daily maintenance
Spray nozzle maintenance and care
Main unit care and maintenance
1. Shut off power supply before doing
maintenance.
2. Wipe the stain with a soft damp cloth.
3. Safety self- inspection
After cleaning, re-connect the toilet with
the power supply.
Maintenance of filter net
Time for maintenance: It is under
normal water pressure but poor
flush performance occurs.
2. Unscrew angle valve nut
1.Turn off power and the angle valve
3. Remove filter net
4. Use the brush to clean filter net
5. Reinstall filter net and angle valve nut
6. Turn on the angle valve and connect
power,then it can work normally after
self inspection.
1. Nozzle self-cleaning
While not sitting on the unit, short press
the “REAR/MOVE” Button on the main
unit, the spray nozzle will extend outward
and water will flow out.
2. Spray nozzle disassemble
When the nozzle moves forward, the nozzle
can be disassembled to clean.
3. Use soft cloth or soft brush to clean
Do not pull or push the rod, to avoid damage.
4. Nozzle retraction
Put the nozzle back to the front of the boom
and press the “Stop” button to automatically
retract the nozzle.
To Next Page
Loading...
