3.Safety self-inspection
10
1.When the host buzzer beeps, the button lights up white, and all the indicator icons on
the display light up to start the self-inspection;
2.The host buzzer will beep again. After the self-inspection, the button will light up white,
and the indicator lights of intelligent night light, water temperature and ECO icon will be
off. And seat temperature icon will be on.
3.Turn on the function and use it normally.
1. Turn on the angle valve
Check thread connection, make sure no leakage is found, unscrew angle valve
anticlockwise to maximum opening.
(Tips: When opening for the first time, the angle valve handle has a larger torque)
Previous preparation
Angle valve
2.Power Connection
Insert power line leakage protection plug into the power socket, press the reset switch,
plug indicator lights on indicating that the power is on.
Tips:
Press electric leakage test button prior to
usage, the reset switch pops up indicating
that the leakage protection function is normal.
Press the TEST button (then RESET button)
every month to assure proper operation
.
Electric leakage
test button
Reset switch
Indicator light
RESET
REMETTRE
TEST
TEST BEFORE EACH USE
1. PLUG INTO RECEPTACLE
2. PRESS RESET BUTTON:
VISUAL INDICATOR APPEARS.
3. PRESS TEST BUTTON:
VISUAL INDICATOR DISAPPEARS.
4. PRESS RESET FOR USE.
DO NOT USE IF ABOVE TEST FAILS.
WARNING:
To Next Page
Loading...
