15
Description of the button function
Stop
Rear washing/
Moving washing
Flush
Tips:
The default setting of all function is on middle level, after using controller,shift to the level
setted last time.
Front washing/
Moving washing
1. Press and hold the “Stop” button on the unit, the unit enters the
shutdown mode (white light off), press the “Stop” button again, the
unit returns to the working mode (White light normally on).[In the
shutdown mode, except for the “Stop” button on the main unit, any
button (including the unit and the remote control ) is invalid ].
2. When the user is seated, press the “Stop” button on the main unit
to stop the feminine washing, rear washing or drying function. When
the user is not seated, press the “Stop” button on the main unit
repeatedly. The main unit switches over between working mode
(White light normally on) and power save mode (white light flash).
1. When people is seated, press "Rear washing" button, to wash the
rear portion of body; Press "Rear washing" button repeatedly, then
turn on/off mobile function; Press "Stop" button to stop. When one
circle cleaning is finished and the body remains seated, the dry
function will be automatically turn on and will stop after one cycle.
2. When no one is seated, press "Rear washing" button, the rod will
stretch out ,people can wash the nozzle and rod manually, press
"Stop" button, the rod will retracts.
1. When the user is seated, long press the “Flush” button on the main
unit to turn on the drying function. After drying for one cycle, it will
stop automatically. During the drying process, press the “Stop”
button to stop the drying function.
2. In the non-off mode, short press the “Flush” button on the main unit
to turn on the flush function. [Under the rear wash or the femail wash
function, the flush function is invalid; when the nozzle is manually
cleaned, the flush function is activated after the nozzle is fully
extended and retracted into position ].
When people is seated, press "Front washing" button, to wash the
front portion of body; Press "Front washing" button epeatedly, then
turn on/off mobile function; Press "Stop" button to stop. When one
circle cleaning is finished and the body remains seated, the dry
function will be automatically turn on and will stop after one cycle.
To Next Page
Loading...
