epoc Host2 User Manual

This quick start guide provides rst time setup instructions and other useful
instructions for the
epoc
®
Host
2
(Motorola MC55A0). For complete user
instructions, please refer to the
epoc System Manual.
epoc Host
2
Components
epoc Host
2
Quick Start Guide
Scan Button(s)
Scan Button
(on side)
Barcode Scanner
Cradle Blade
Keypad
Barcode Scan LED
Barcode scanning active
Successful scan/capture (blinking)
Radio Status LED
(NOT USED!)
Touch Screen
(with screen protector)
51005527-04
Epocal, Inc.
2060 Walkley Road
Ottawa, ON K1G 3P5
CANADA
Emergo Europe
Molenstraat 15
2513 BH, The Hague
The Netherlands
Phone: +31.70.345.8570
Fax: +31.70.346.7299
Power Button

Charging/Battery LED
Battery fully charged
Battery charging (blinking)
Charging error (fast blink)



epoc Host2 Specifications

General

Brand	epoc
Model	Host2
Category	Handhelds
Language	English

Summary

epoc Host² Components

Barcode Scan LED

Indicates the status of barcode scanning operations on the device.

Barcode Scanner

The component used for reading barcodes on the epoc Host².

Scan Button(s)

Physical buttons used to initiate barcode scanning.

Power Button

Controls the device's power state, turning it on and off.

Charging/Battery LED

Visual indicator for the battery charging status and level.

Radio Status LED

Indicates the status of wireless communication.

Touch Screen

The primary interactive display interface of the epoc Host².

Keypad

The physical input keys for data entry on the device.

Cradle Blade

The docking accessory for charging and data transfer.

epoc Host² Numeric Keypad

Charge the epoc Host²

Connect to your Wi-Fi Network

Configure Wi-Fi Network Profile

Steps to set up a Wi-Fi network connection profile on the device.

Reset the epoc Host²

Connect to the epoc Data Manager (EDM)

Configure EDM Options

Settings for connecting the epoc Host² to the Data Manager system.

Confirm EDM Connection

Verifies the successful establishment of a connection to the EDM.

Device Maintenance and Accessories

Removing or Replacing the Screen Protector

Instructions for managing the device's screen protection.

Installing the Cradle

Guidance on attaching the device to its charging cradle.

Install or Replace the microSD Card