System management
Mastercycler
®
nexus
English (EN)
69
8.2.3 Deleting a user account
You must be logged in as an administrator to be able to delete user accounts.
1. Mark the user node. Press the del key.
A query appears whether you really want to delete the user account.
2. Press the OK softkey.
The user account is deleted.
8.2.4 Changing the administrator PIN
If you are logged on as an administrator, you can change the administrator PIN at any time.
1. Switch on the Mastercycler nexus and log in as the administrator.
2. Mark the System node. Press the Prop. softkey.
The System Properties window appears.
3. Enter the new administrator PIN using the numeric keys.
If you have entered the PIN incorrectly, delete it with the del key and re-enter the PIN.
4. Re-enter the new PIN in the Confirmation: field to confirm.
5. Press the OK softkey.
The new administrator PIN is immediately valid.
Deleting a user account will delete the respective user node including all folders and
programs it contains. Deleting a user account is a permanent change and cannot be undone.
NOTICE! Data loss due to unauthorized use of the administrator password.
The administrator password protects the device software from unwanted access.
Make a note of the administrator password.
Keep the administrator password at a secure location.
Only provide the administrator password to individuals who work with the system
configuration.
Please contact Eppendorf AG if you have any problems with the administrator password.
To Next Page
