Epson 300 - Chapter 2 Setting up the Printer; Unpacking the Printer; Setting up the Printer

This chapter explains how to set up your printer. If you did not
already do this as described in the Start Here guide, follow the
procedures here. (If you did set up your printer, skip to
Chapter 3.)
Unpacking the Printer
Your printer box should include a CD-ROM, which includes
the printer software that runs your printer, and the following
items:
Remove all protective materials packed with your printer
before you set it up and turn on the power. Follow the
instructions on the NOTICE sheet packed with the printer to
remove these materials. Save all packaging and protective
materials in case you need to transport the printer later.
printer
paper support
ink
cartridge
CD-ROM
(printer software)
User’s Guide
00
L
Hudson++ Ref. Guide
Rev.d
A5 size Chapter 2
05-6-98 DR, pass 5
2-2
Setting Up the Printer