EasyManua.ls Logo

Epson 300 - Connecting the Printer to Your PC

Epson 300
91 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9. Close the printer cover.
The life of a cartridge depends on the amount of text and color
graphics you print or the number of colors you use in your
document.
Note:
When ink runs out, see “Replacing the Ink Cartridge” in Chapter 5.
Connecting the Printer to Your PC
To connect the printer to your computer using the built-in
parallel interface, you need a shielded, twisted-pair parallel
cable.
Connect the printer to the computer as follows:
1. Make sure both the printer and computer are turned off.
2. Plug the cable connector securely into the printer’s interface
connector. Then squeeze the wire clips together until they
lock in place on both sides. If your cable has a ground wire,
connect it to the ground connector below the interface
connector.
14
L
Hudson++ Ref. Guide
Rev.d
A5 size Chapter 2
05-6-98 DR, pass 5
2-10
Setting Up the Printer

Table of Contents

Related product manuals