EPSON Stylus Pro 3800/3800C/3850 Revision A
DISASSEMBLY & ASSEMBLY Disassembly/Assembly Procedure (Group 1) 104
4.3.3.10 HOUSING, FRONT, UPPER
1. Remove the HOUSING, REAR, ASSY. (p95)
2. Remove the HOUSING, FRONT, LEFT. (p97)
3. Remove the HOUSING, FRONT, RIGHT. (p98)
4. Remove the COVER, PRINTER. (p99)
5. Remove the HOUSING, LEFT. (p102)
6. Remove the HOUSING, RIGHT. (p103)
7. Remove the five screws that secure the HOUSING, FRONT, UPPER and remove it.
Two C.B.P. 3 x 8 screws (6 ± 1 kgf.cm)
Two Shaft, Mount, Plates (9 ± 1 kgf.cm)
One C.B.S. 3 x 8 screw (9 ± 1 kgf.cm)
Figure 4-16. Removing the HOUSING, FRONT, UPPER
C.B.P. 3x8
C.B.P. 3x8
C.B.S. 3x8
Shaft, Mount, Plates
HOUSING, FRONT,
UPPER
To Next Page
Loading...
