Epson 3800 - Stylus Pro Color Inkjet Printer - Auto Bi-D Adjustment

EPSON Stylus Pro 3800/3800C/3850 Revision A
ADJUSTMENT Standard Adjustment 233
5.3.15 Auto Bi-D Adjustment
 Purpose
Carries out an automatic Bi-directional alignment adjustment using the ink mark
sensor.
 Paper Used
 Size: A4/Letter
 Type: Economy SuperFine Paper
 Procedure
1. Turn the printer ON.
2. Start up the Adjustment Program and select [Auto Bi-D Adjustment].
3. Click [Run] to print the adjustment pattern.
When the pattern is printed, the printer automatically starts to scan the pattern and
performs the corrections. (No manual adjustment is required.)
4. Click [Finish].
Figure 5-61. [Auto Bi-D Adjustment] Screen
Figure 5-62. Adjustment Pattern
Auto-Bid_01
Bi-D VSDX, PGXXX
M = XXX, C = XXX, Pk/Mk = XXX, Y = XXX, LLk = XXX, Lk = XXX, Lc = XXX, Lm = XXX
VSD3 M, C, Bk, Y, LLk, Lk, Lc, Lm ( 0 >> XXX )
[ Dot miss-alignment Vertical ]