EPSON Stylus Pro 3800/3800C/3850 Revision A
DISASSEMBLY & ASSEMBLY Overview 89
4.1.4 Screws
The following table indicates the screws used in the printer.
4.1.5 Chapter Organization
The maintenance parts of this product are classified into two groups according to the
site they are repaired. Therefore, disassembling procedures are divided into two groups
as described below.
Group 1: For both on-site and off-site services
Group 2: Applicable to off-site service only.
Table 4-2. Screws
Name Color Definition
Protective Screw Silver Special Screw
C.B.P. 3x8 Silver Phillips Bind P-tite Screw
C.B.S. 3x8 Silver Phillips Bind S-tite Screw
C.B.P. 3x6 Silver Phillips Bind P-tite Screw
C.B.S. 3x6 Silver Phillips Bind S-tite Screw
C.F.S. 3x6 Silver Phillips Flat Head S-tite Screw
C.B.(O) 4x8
Green
Phillips Bind Head S-tite Screw with Outside Toothed
Lock Washers
C.P.S. 2.6x3 Silver Phillips Pan Head S-tite Screw
C.C.S. 3x4 Silver Phillips Cup Head S-tite Screw
C.B.P. 2.5x8 Silver Phillips Bind Head P-tite Screw
C.B.S. 2.5x4 Silver Phillips Bind Head S-tite Screw
C.B.S. (P4) 3x8 Silver Phillips Bind Head S-tite Screw with Plain Washer 1
C.P.B. 1.7x8 Silver Phillips Pan Head P-tite Screw
Shaft, Mount, Plate Silver
---
To Next Page
Loading...
