Epson 3800 - Stylus Pro Color Inkjet Printer - Initial Ink Charge; Cleaning

EPSON Stylus Pro 3800/3800C/3850 Revision A
ADJUSTMENT Standard Adjustment 215
5.3.8 Initial Ink Charge
 Purpose
Carry out the initial ink charge.
 Procedure
1. Turn the printer ON.
2. Start up the Adjustment Program and select [Initial Ink Charge].
3. Press the F5 key to pop up a verification screen, and click [OK] to start the
initial ink charge.
4. When ink charge is completed, click [Finish].
Figure 5-35. [Initial Ink Charge] screen
5.3.9 Cleaning
 Purpose
There are four types of head cleaning. Select and run a one of them to clean the
print head.
 Procedure
1. Turn the printer ON.
2. Start up the Adjustment Program and select [Cleaning].
3. Select the cleaning type and press the corresponding key (F1 to F4) to run the
selected cleaning.
4. When the cleaning is completed, click [Finish].
Figure 5-36. [Cleaning] Screen
F5
Key Cleaning Amount of Ink Consumption Processing Time
F1 CL1
Approx. 0.64g / 8 colors Approx. 2 min. 08 sec.
F2 CL2
Approx. 4.2g / 8 colors Approx. 2 min. 12 sec.
F3 CL3
Approx. 12.0g / 8 colors Approx. 2 min. 15 sec.
F4 CL4
Approx.16.0g / 8 colors Approx. 1 min. 29 sec.