EPSON Stylus Pro 3800/3800C/3850 Revision A
DISASSEMBLY & ASSEMBLY Disassembly/Assembly Procedure (Group 1) 163
3. Slide the INK WASTE BOX to the left and release it from the tab of the main
frame, and remove the INK WASTE BOX.
See Figure 4-95.
4. Remove the POROUS PAD, INK WASTE BOX, RIGHT and the POROUS PAD,
INK WASTE BOX, LEFT from the INK WASTE BOX.
See Figure 4-96.
Figure 4-95. Removing the INK WASTE BOX
Figure 4-96. Removing the POROUS PAD, INK WASTE BOX, RIGHT/LEFT
Align the two guide pins and one positioning groove of the INK
WASTE BOX with the two positioning holes and one hooked tab of
the main frame to secure the INK WASTE BOX.
A D J U S T M E N T
R E Q U I R E D
Whenever the POROUS PAD, INK WASTE BOX RIGHT/LEFT
are replaced, the corresponding adjustments must be carried out.
See Chapter 5 "ADJUSTMENT" (p190).
Left side
Right side
Engage the hooked
tab with the groove.
positioning point
positioning point
INK WASTE BOX
INK WASTE BOX
INK WASTE BOX
POROUS PAD, INK WASTE BOX, RIGHT POROUS PAD, INK WASTE BOX, LEFT
To Next Page
Loading...
