EPSON Stylus Pro 3800/3800C/3850 Revision A
PRODUCT DESCRIPTION Operation Panel 33
47 Paper Size Check Error Error --
PAPER SIZE ERROR
LOAD THE CORRECT SIZE
PAPER
Light Blink Off
48 Ink Mark Sensor Sensitivity Control Error Error --
PAPER SENSOR ERROR
PRESS THE BUTTON
LOAD DIFFERENT PAPER
Light Blink Off
49
Ink Mark Sensor Adjusted Value Error
Adjusted value cannot be set
Adjusted range over
Error --
PAPER_SENSOR_ERROR
PRESS THE BUTTON
LOAD THE CORRECT PAPER
Light Blink Off
50
Nozzle Check Error
Nozzle cannot be recovered
Error --
CLEANING ERROR
PRESS THE CANCEL/RESET
BUTTON
Light Blink Blink
51
Cleaning Error
W/ board paper
Before printing when PW inspection is OFF
Error
CLEANING_ERROR
PRESS THE
DOWN BUTTON
AND REMOVE
THICK PAPER
Light Light Off
52 During Initialization -- -- PLEASE WAIT Blink Off Off
53 During Sequence -- -- PLEASE WAIT Blink Off Off
64 Paper Initial Trigger Waiting Status (No waiting time) -- -- READY Light Off Off
55 Paper Initial Trigger Waiting Status (Auto loading) -- -- READY Light Off Off
56 Paper Setting Error Error --
PAPER SETTING ERROR
CHECK PAPER SOURCE_IN
THE DRIVER SETTINGS
AND LOAD PAPER
CORRECTLY
Light Light Off
57 Internal Pattern Printing -- -- PRINTING Blink Off Off
58 Setting Panel Error -- SETTING... Light Off Off
59 Initializing Paper -- -- PLEASE WAIT Light Off Off
60 Ink Drying -- --
INK_DRYING
NNNN_SEC
Blink Off Off
61 Maintenance Call Warning Warning --
MAINTENANCE_REQUEST
NNNN
Light Special Blink Off
62 Ink Low Warning Warning -- INK LOW Light Off Blink
No Error/Warning Status
Error or
Warning
Illustration
on LCD
Message on LCD
LED
Power Paper Status Ink Status
To Next Page
Loading...
