39
If your paper jams frequently:
■
Use smooth, high-quality paper, loaded printable side up (the whiter or shinier
side on special ink jet paper).
■
Fan the stack and then even the edges before loading it.
■
Don’t load paper above the arrow mark on the left edge guide.
■
Always load the correct size paper for your print job.
■
Place the paper against the right edge of the sheet feeder and slide the left edge
guide against your paper.
Multiple pages feed at once.
Remove the stack of paper from the printer. Then:
■
Make sure the paper isn’t too thin.
■
Fan the edges of the stack of paper to separate the sheets.
■
Reload the paper as described on page 5.
■
Make sure the left edge guide fits against the paper, but not too tightly.
Solving Miscellaneous Printout Problems
The margins are incorrect.
■
Make sure the paper settings in your printer software are correct for your paper
size. See the electronic Reference Guide for instructions.
■
Check your software documentation for instructions on selecting the correct
margins for your paper size. The margins must be within the printable area of
the page, as described in “Specifications” in your electronic Reference Guide.
The image size or position is incorrect.
Make sure the paper and/or layout options are set correctly.
The image is inverted, as if viewed in a mirror.
Tu r n o f f
Flip Horizontal
in the printer software or the mirror setting in your
application software. (If you’re printing on EPSON Iron-On Cool Peel Transfer
Paper, the image should be inverted so it looks correct when it’s ironed on.)
Pbasics.book Page 39 Wednesday, August 9, 2000 10:26 AM
To Next Page
Loading...
