19
Printing Photos Directly from PC Cards
Available Media Types
The type and quality of media determines the finish of your prints.
Be sure to read the following information and select the correct
paper for your needs.
Note:
❏ You should always print at normal room temperature and humidity:
15 to 25°C (59 to 77°F) and 40 to 60% RH.
❏ Do not touch the printable surface of the media. Fingerprints may
degrade in print quality.
Plain paper (A4, 100 x 150 mm)
When using plain paper, please observe the following:
❏ Use paper of 64 to 90 g/m² weight and 0.08 to 0.11 inches thick.
❏ Load paper up to the arrow mark on the edge guides.
EPSON special media
EPSON provides special print media that is formulated for the ink
used on EPSON ink jet printers. EPSON recommends you use
media distributed by EPSON to ensure high-quality results.
Before loading any media distributed by EPSON, read the
instruction sheet packed with it and keep the following in mind:
To Next Page
Loading...
