Epson 925 - Page 50

44
4. Specify the number of the photo you want to print. The
example below shows photo number 2. Specify 0 as the
number of photos to leave the print area blank.
5. Specify the number of copies for the photo you selected in
step 4.
6. Repeat steps 4 through 5 to select photos and specify the
number of copies for each.
7. Make the Quality and Photo Enhance settings. The example
below shows printing at high quality with PhotoEnhance on.
8. Press the Print button to print the selected photos.
Note:
To change the number of copies, move the cursor to the Copies setting,
then select the number of copies with the left and right arrow buttons.