Using Continuous Paper with Optional Push Tractor
6.
Make sure your paper has a clean, straight edge. Fit the first four
holes of the paper over the sprocket pins, and then close the
sprocket covers. Slide the left sprocket unit to remove any slack
in the paper. Then push the lock lever down to lock it in place.
Note that this printer prints on the underside of the paper.
7.
Turn on the printer. It advances the paper to the loading position
automatically when it receives data.
Note:
If the printer runs out of paper during a print job, attach
additional paper to the push tractor and press the
FORM FEED
button.
I
Paper Handling 2-9
To Next Page
Loading...
