Using the Defaulf-Setting Mode
If you find that you do need to change a default setting, you can
make your changes with the YES and
NO
buttons on the control
panel.
---
YES
NO
Here’s a quick overview of how you change your printer settings:
1.
Enter the default-setting mode.
2.
Use the YES and
NO
buttons to respond to printed questions.
3.
Turn off the printer to exit the default-setting mode.
See the next section for step-by-step instructions. For a short
summary of each printer feature, turn to page 3-11.
Changing the default settings
1.
Make sure the printer is turned off and paper is loaded in the
paper cassette. If you installed the optional push tractor, you can
use continuous paper.
2.
Slide the narrow cover off of the printer cover as shown. This
makes it easier to read the printed messages.
Using the Printer
3-7
To Next Page
Loading...
