Using Continuous Paper with Optional Push Tractor
Tips for using continuous paper
You can adjust the top-of-form position temporarily. Open the
printer cover and turn the gear marked by + and - signs to
adjust the position. This adjustment is lost when you turn off the
printer or feed the paper backward to the paper-park position by
pressing the
FORM FEED
and
FONT
buttons at the same time.
paper-park position
If you want to change the top-of-form position permanently,
adjust it with the default-setting mode as described in Chapter 3.
Each time you turn on the printer with paper loaded, it reverses
the continuous paper to the paper-park position and then
advances it to the next top-of-form. Always remove your printed
sheets before you turn off the printer to keep the top-of-form
position accurate.
2-10
Paper Handling
To Next Page
Loading...
