Epson ActionPrinter 3250 - Bit Image

Command Summa y
ASCII Dec.
Hex.
Description
ESC: 0 n 0
58 3A
ESC % n
37 25
ESC 6
54 36
ESC 7 55 37
ESC ( ˆ nn
40 94 28 5E
Bit image
ASCII Dec.
Hex.
Copy ROM to RAM
n = 0, 1, 2, 3, 4, 5, 6, or 9
n: Typeface (see list in ESC k command
description)
Select User-Defined Set
n = 0: Normal set
1: User-defined set
Enable Printing of Upper Control Codes
This command enables the printing of codes
128-159 (if current table has characters in those
locations).
Enable Upper Control Codes
Cancels ESC 6
Print Data as Characters
ESC ( ˆ nl n2 data
n = nl + n2 x 256
n: Amount of data
data: The following n bytes of data printed as
characters
Description
ESC * nn
42 2A Select Bit Image
ESC * m nl n2 data
n = nl + n2 x 256
n: Total columns
Total data = (nl + n2 x 256) x t
t = Number of data bytes per column
A-20 Appendix