Connecting
the
Printer to Your Computer
4.
Plug the other end of the cable into the computer. If there is a
ground wire at the computer end of the cable, attach it to the
ground connector at the back of the computer.
Note:
If you want the power cord or interface cable to be on the
opposite side, route it through the slot on the back.
Setting Up Your Application Software
Most application programs let you specify the type of printer you
use so that the program can take full advantage of the printer’s
features. Many programs provide an installation or setup menu that
presents a list of printers.
Setting Up the Printer
1-13
To Next Page
Loading...
