Cause What to do
For Windows users only
The print data is too large.
Click Advanced on the PostScript sheet of the printer’s Properties,
then change the Data Format setting from ASCII data (default) to
TBCP (Tagged binary communications protocol).
When the Binary setting is set to On, TBCP is not available. Use the
Binary protocol. For details about setting, see the Network Guide.
For Windows users only
Printing cannot be performed using the network
interface.
Click Advanced on the PostScript sheet of the printer’s Properties,
then change the setting from ASCII data (default) to TBCP (Tagged
binary communications protocol).
When the Binary setting is set to On, TBCP is not available. Use the
Binary protocol. For details about setting, see the Network Guide.
An undefined error occurs (Macintosh only)
Cause What to do
The version of the Mac OS that you are using is
unsupported.
This printer’s driver can only be used on Macintosh computers
running Mac OS X version 10.4.11 or later.
Epson AcuLaser M2300/M2310/M2400/M2410 Series User’s Guide
Troubleshooting 115
To Next Page
Loading...
Need help?
General