To Next Page

To Previous Page

Item Settings (default in bold)

Auto LF

Off, On

Alt. Graphics

Off, On

Bit Image

Dark, Light

ZeroChar

0, (or the zero character with a slash)

CharacterSet

1, 2

Font

Selects the font.

Pitch

Selects the pitch (the horizontal spacing) of the font in fixed pitch, measured in cpi (characters per

inch). You can also choose proportional spacing.

Code Page

Selects the character tables. Character tables contain the characters and symbols used by different

languages. The printer prints text based on the selected character table.

T.Margin

Sets the distance from the top of the page to the baseline of the first printable line. The distance is

measured in inches. The smaller the value, the closer the printable line is to the top.

Text

Sets the page length in lines. For this option, a line is assumed to be 1 pica (1/6 inch). If you change the

Orientation, Page Size, or T.Margin settings, the page length setting automatically returns to the

default for each paper size.

Auto CR

Specifies whether the printer performs a carriage-return/line-feed (CR-LF) operation whenever the

printing position goes beyond the right margin. If this setting is off, the printer does not print any

characters beyond the right margin and does not perform any line wrapping until it receives a

carriage-return character. This function is handled automatically by most applications.

AL-M300/AL-M400 Series User's Guide

Using the Control Panel 85

Epson AL-M400 Series User Manual

Questions and Answers: