Epson AL-M400 Series User Manual

c
Important:
Make sure that the printed image does not extend beyond the edge of the paper. Otherwise, you
may damage the printer.
T Offset B
Adjusts the vertical printing position on the back of the paper when printing on both sides. Use this if
the printout on the back is not where you expected.
L Offset B
Adjusts the horizontal printing position on the back of the paper when printing on both sides. Use this
if the printout on the back is not where you expected.
Setup Menu
Item Settings (default in bold)
Language
English, Français, Deutsch, Italiano, ESPAÑOL, SVENSKA, Dansk, Nederlands, SUOMI,
Português, Norsk,
, , Türkçe, , ,
Time Out
0, 5 to 60 to 300 in increments of 1
MP Mode
Normal, Last
Manual Feed
Off, 1st Page, EachPage
Copies
1 to 999
Duplex
*1
Off, On
Binding
*1
Long Edge, Short Edge
Start Page
*1
Front, Back
Skip Blank Page
*2
Off, On
Auto Eject Page
*3
Off, On
Size Ignore
Off, On
Auto Cont
Off, On
Page Protect
*2
Auto, On
A4/LT Auto Switching
On, Off
AL-M300/AL-M400 Series User's Guide
Using the Control Panel 69

Epson AL-M400 Series Specifications

General

Brand	Epson
Model	AL-M400 Series
Category	Printer
Language	English