Epson Apex 80 - Page 85

ESC 2
Format:
ASCII code: ESC 2
Decimal:
27
50
Hexadecimal: 1B 32
Comments:
Select 1/6-inch Line Spacing
Sets the line spacing to l/6 of an inch for subsequent line feed
commands. The “2” is the character two and not ASCII code 2. This
is the default at power on.
ESC 3
Select n/216-inch Line Spacing
Format:
ASCII code: ESC 3 n
Decimal: 27
51
n
Hexadecimal: 1B
33 n
Comments:
Sets the line spacing to n/216 of an inch for subsequent line feed
commands. The “3” is the character three and not ASCII code 3.
The value of n must be from O-255.
ESC A
Select n/72-inch Line Spacing
Format:
ASCII code:
ESC A n
Decimal:
27 65 n
Hexadecimal: 1B
41 n
Comments:
Sets the line spacing to n/72 of an inch for subsequent line feed
commands. The value of n must be from O-85.
A-14
Command Summary