Epson Apex 80 - Cancel Italic Mode; Select Italic Mode

ESC 4
Select Italic Mode
Format:
ASCII code: ESC 4
Decimal: 27 52
Hexadecimal: 1B
34
Comments:
Causes characters from the italic character set to be printed.
This command is valid even if the Epson Character Graphics set has
been selected by ESC t or DIP switch 1-3, but character graphics
cannot be italicized.
ESC 5
Format:
ASCII code:
ESC 5
Decimal:
27
53
Hexadecimal: 1B 35
Comments:
Cancels the mode selected by ESC 4.
Cancel Italic Mode
Command Summary
A-27