ESC G
Select Double-strike Mode
Format:
ASCII code: ESC G
Decimal:
27 71
Hexadecimal:
1B 47
Comments:
Makes text bolder by printing each line twice, with the second
printing slightly below the first. In
NLQ
the mode is not available
but is not cancelled.
ESC H Cancel Double-strike Mode
Format:
ASCII code: ESC H
Decimal:
27 72
Hexadecimal: 1B
48
Comments:
Turns off the double-strike mode selected by ESC G.
ESC S O
Select Superscript Mode
Format:
ASCII code: ESC S
NUL
Decimal:
27 83 0
Hexadecimal:
1B 53 00
Comments:
Prints characters about two-thirds of the normal height in the upper
part of the character space. The ASCII code 0 or the character “0”
can be used in this command. It is cancelled with ESC T.
A-24
Command Summary
To Next Page
Loading...
