Epson B11B259201 User Manual

Starting on Windows
❏ Windows 10
Click the start button, and then select Epson Soware > EPSON Soware Updater.
❏ Windows 8.1/Windows 8
Enter the application name in the search charm, and then select the displayed icon.
❏ Windows 7
Click the start button, and then select All Programs > Epson Soware > EPSON Soware Updater.
Starting on Mac OS
Select Go > Applications > Epson
Soware
> EPSON
Soware
Updater.
Application for Conguring Scanner Operations (Web Cong)
Web Cong is an application that runs in a web browser, such as Internet Explorer and Safari, on a computer or
smart device. You can conrm the scanner status or change the network service and scanner settings. To use the
Web Cong, connect the scanner and the computer or device to the same network.
e following browsers are supported.
Microso Edge, Internet Explorer 8 or later, Firefox
*
, Chrome
*
, Safari
*
*Use the latest version.
Running Web Cong on a Web Browser
1.
Check the scanner's IP address.
Select Settings > Network Status > IP Address on the scanner's control panel to
conrm
the scanner's IP
address.
2.
Launch a Web browser from a computer or smart device, and then enter the scanner's IP address.
Format:
IPv4: http://the scanner's IP address/
IPv6: http://[the scanner's IP address]/
Examples:
IPv4: http://192.168.100.201/
IPv6: http://[2001:db8::1000:1]/
Note:
❏ Since the scanner uses a self-signed certicate when accessing HTTPS, a warning is displayed on the browser when
you start Web
Cong
; this does not indicate a problem and can be safely ignored.
❏ If the administrator password has not been set when accessing Web
Cong
, you need to set a user name and
password.
c
Important:
Do not forget the user name and the password. If you forget them, you will need to contact Epson service
support.
Scanner Basics > Information on Applications > Application for Conguring Scanner Operations (Web Cong)
23

Epson B11B259201 Specifications

General

Brand	Epson
Model	B11B259201
Category	Scanner
Language	English