Epson B11B259201 - Setting a Password and Locking the Control Panel

22
You see a screen like this:
3. Use the arrow buttons to select Roller Replacement Alert Settings and press the OK button.
4. Use the arrow buttons to change the number of scans before the notification appears.
5. Press the OK button to exit.
Parent topic: Using the Control Panel
Setting a Password and Locking the Control Panel
You can set an administrator password to lock the following settings and prevent them from being
changed:
Note: You should set an administrator password and keep it in a safe place. You must know the
administrator password in order to change or delete it. If you forget the password or inadvertently set it,
the product will need to be sent to Epson for service.
• Network settings
• Web Service settings
• Scanner settings
• System Administration settings
• Web Config settings
• EpsonNet Config settings