Scanning Using the Scanner’s Control Panel
You can use the following methods to save scanned images from the scanner’s control panel.
Using (Quick Send) button, or Preset
You can save the scanned image to a network folder, or send the image by e-mail using pre-congured
settings.
You can congure the settings in Web Cong.
Computer
You can save the scanned image to a computer connected to the scanner.
WSD
You can use the WSD feature to save the scanned image to a computer connected to the scanner, using
WSD feature.
Related Information
& “Scanning Using Quick Send Buttons” on page 92
& “Scanning Using Preset Settings” on page 93
& “Scanning Originals to a Computer” on page 93
& “Scanning Using WSD” on page 94
Scanning Using Quick Send Buttons
Using (Quick Send) buttons, you can save the scanned image to a network folder, or send the image by e-
mail using pre-congured settings.
You can congure the settings in Web Cong.
1.
Place the originals.
2.
Press any of the
(Quick Send) buttons.
e Quick Send screen is displayed, and congured destinations are listed.
Note:
You can also display the Quick Send screen by selecting Quick Send on the home screen.
3.
Press the
(Quick Send) button for the destination to which you want to send your scans.
Scanning starts.
Related Information
& “Registering Preset or Quick Send Buttons” on page 87
Basic Scanning
>
Scanning Using the Scanner’s Control Panel
>
Scanning Using Quick Send Buttons
92