Epson B11B259201 User Manual

3.
Load the laminated cards into the input tray facing down with the top edge facing into the ADF.
Slide the laminated cards into the ADF until they meet resistance.
4.
Slide the edge guides to t the edge of the laminated cards.
Note:
To scan laminated cards, set the appropriate setting in the Epson Scan 2 window.
When you are using Document Capture Pro, you can open the window by pressing the Detailed Settings button on the
Scan Settings screen.
❏ To increase the accuracy of auto size detection, select the Main Settings tab > Document Size > Settings > Scan
laminated card. See the Epson Scan 2 help for details.
❏ Select the Main Settings tab > Detect Double Feed > O. See the Epson Scan 2 help for details.
If Detect Double Feed is enabled in the Epson Scan 2 window and a double feed error occurs, remove the card from
the ADF, reload it, press the
d button, and then select DFDS Function (Double Feed Detection Skip function) on
the control panel to set it to On. is disables Detect Double Feed for the next scan, and you can scan again. e
DFDS Function only disables Detect Double Feed for one sheet.
Specications of Originals and Placing Originals > Placing Originals > Laminated Cards
45

Epson B11B259201 Specifications

General

Brand	Epson
Model	B11B259201
Category	Scanner
Language	English