Printer Specifications
Mechanical
Printing method:
9 × 2-pin impact dot matrix
Printing speed: Ultra high speed draft 615 cps at 10 cpi
738 cps at 12 cpi
High speed draft 612 cps at 10 cpi
694 cps at 12 cpi
Draft 463 cps at 10 cpi
555 cps at 12 cpi
Draft emphasized 231 cps at 10 cpi
Near letter quality 115 cps at 10 cpi
138 cps at 12 cpi
Printing direction: Bidirectional logic seeking for text and graphics printing. Unidirec‐
tional text or graphics printing can be selected using software com‐
mands.
Line spacing: 1/6-inch or programmable in 1/432-inch increments
Printable columns: FX-890II/FX-890IIN:
80 columns (at 10 cpi)
FX-2190II/FX-2190IIN:
136 columns (at 10 cpi)
Resolution:
Maximum 240 × 144 dpi (near letter quality)
Paper feed methods: Friction (front, rear)
Push tractor (front, rear)
Pull tractor (front, bottom, rear)
Push and pull tractor (additional tractor is required) (front, rear)
CSF Bin1/Bin2 (optional)
Roll paper holder (optional)
FX-890II/FX-890IIN/FX-2190II/FX-2190IIN User’s Guide
Product Information 141
To Next Page
Loading...
Need help?
General