!
Caution:
❏ Do not turn off Packet mode setting.
❏ Network connection and serial connection are not supported.
❏ Make sure that the printer status is ready before getting setting from the printer or updating the
printer settings.
Changing printer setting
To change printer settings, follow the steps below.
1. Open the Utility menu, then click the Printer Setting icon. To find out how to open the Utility
menu, see “Using the Printer Driver” on page 59. The Printer Setting windows appears.
2. Change the necessary printer settings. For details on how to use this tool, refer to the printer driver
Help.
FX-890II/FX-890IIN/FX-2190II/FX-2190IIN User’s Guide
Printer Software 75
To Next Page
Loading...
Need help?
General