Product Information 102
❏ Poor quality discs may reduce print quality and cause disc jams or other problems. If you
encounter problems, switch to a higher grade of disc.
❏ The specified disc is for ink jet printers. Thermal transfer discs are not supported.
❏ The specified disc has a moisture adhesive ink receptor layer on the label surface. If stored
stacked, especially under high humidity and high temperature conditions, discs may adhere to
each other. If an automatic duplication machine is used, please check the disc before using.
❏ Please treat the recording surface (blue green colored side) and printing surface carefully so
they do not have fingerprints, dirt, dust, water, or scratches. Dust and dirt on the recording
surface should be wiped gently with soft dry cloth, commercially available CD/DVD/BD cleaner,
or ethyl alcohol. Do not use benzine, thinner, or antistatic material.
CD/DVD/BD:
Notes for handling discs
Notes when using discs
❏ Do not touch recording surface when holding it.
❏ Handle with care so that label surface and recording surface do not have fingerprints,
dirt, dust, water drops, or scratches.
❏ Do not drop or hit discs.
❏ Do not apply excess force, like pinching with a clip, or bend.
❏ Do not attach an adhesive sticker to the disc. This may result in the disc being unable
to record or play.
❏ Do not use in a place where lots of dirt and dust are present.
❏ If write and print are performed separately, it is recommended to write before printing.
❏ Leaving discs stacked may result in discs sticking to each other.
❏ Let the discs dry naturally after printing. Touching the surface with your hand or
splashing the surface with water right after printing may result in blurriness and
stickiness.
Type CD-R/DVD-R 4.7GB/DVD+R 4.7GB/DVD-R DL 8.5GB/DVD+R
DL 8.5GB/BD-R/BD-R DL
Label side Printable
Glossy labels other than the specified disc type are not
supported.
Specified disc CD-R, DVD-R, BD-R
To Next Page
Loading...
