Publishing Discs 27
❏ Do not shock or vibrate the product while reading or writing, as this may result in
malfunction of the drive or make the disc unusable.
❏ Do not use a cracked, warped, or deformed disc because it may break in pieces inside
the product and cause malfunction or injury.
❏ A disc may become unreadable or unwritable if it has a small scratch or dirt; therefore,
please handle it with care.
❏ Hold disc by the edge, and do not touch either surface.
❏ The completed job display of EPSON Total Disc Monitor shows the number of
successes, number of failures, and number of discs printed.
❏ Do not use discs with lens cleaner, a label sticker, or condensation on them as it may
cause mechanical error or malfunction.
❏ If the file system of the computer used is FAT, DVD/BD writing may not be possible.
Precautions for Duplicating CDs/DVDs/BDs
❏ Please use a CD/DVD/BD drive that supports MMC 4.0-compatible commands and
operates in conformity with MMC 4.0 as a source drive for copying. (Please check the
Epson website for a list of drives for which operation has been verified.)
❏ Copying CDs/DVDs/BDs may not be possible depending on the type of CD/DVD/BD
source drive used. If problems occur, please try using a different CD/DVD/BD source
drive for copying.
❏ To copy from the drive using EPSON Total DIsc Maker, please log onto Windows as a
user with administrator privileges (belonging to the administrator group). Otherwise,
copying is not possible, because certain parts of the drive cannot be accessed with a
limited user account.
❏ If the source disc is a multi-session CD/DVD/BD, it cannot be copied.
❏ If the source disc is a packet-written CD, it cannot be copied.
Printing on CDs/DVDs/BDs with a Commercially Available Software
Package
When you print on CDs/DVDs/BDs with a commercially available software package that
supports CD/DVD/BD printing, you have to make the following settings.
To Next Page
Loading...
